Mechanical Parts Page 3
Transom Cable Guide. - This unit mounts on the inside of the transom and guides the steering cable through the cut-out in the transom. The sheave in the photo has been replaced with a nylon puck that is self lubricating and will not corrode. Two each are required.
guide parts:
1. Bracket stock no machining Part Kit P/N 01-1032 $7.50
2. Nylon Puck
3. 1/4-20 ss cap screw,washers and nyloc nut. Assembly P/N 01-1033 $ 15.50
4. 10-32 x 1 1/4 FH ss screws w nyloc nuts
guide parts:
1. Bracket stock no machining Part Kit P/N 01-1032 $7.50
2. Nylon Puck
3. 1/4-20 ss cap screw,washers and nyloc nut. Assembly P/N 01-1033 $ 15.50
4. 10-32 x 1 1/4 FH ss screws w nyloc nuts
Foot Pedal - Photo shows pedal on the aft side of frame 2.The inside pivot is a 'rod end' that can move 1/8th inch for/aft through the frame. On the far side is the Pedal Detector that responds to that for/aft movement, starting the motor when the pedal is depressed. The return spring is different for the port (P) and starboard (S) pedals, thus 2 kits are required.
Pedal assy parts: Part Kit P/N 01-1025 (P) $29.50
1. Tool steel rod .368 x 18 inches Assembly 01-1026 (P) $45.50
2. Rod end, 2 washers and jam nut (2 ea)
3. nylon sleeve bearing set Part Kit P/N 01-102 7(S) $ 29.50
4. return spring Assembly 01-1028 (S) $ 45.50
5. Hose clamp (2ea)
Pedal assy parts: Part Kit P/N 01-1025 (P) $29.50
1. Tool steel rod .368 x 18 inches Assembly 01-1026 (P) $45.50
2. Rod end, 2 washers and jam nut (2 ea)
3. nylon sleeve bearing set Part Kit P/N 01-102 7(S) $ 29.50
4. return spring Assembly 01-1028 (S) $ 45.50
5. Hose clamp (2ea)
KF-12 Pedal Extension - The KF- 12 boat has two positions for the front seat. When in the rear position the pedal extensions are required. They are permanently installed and are placed into the stored position when the seat is forward. Two extensions are required.
Pedal extension Parts:
1. .368 x 8 inch steel rod Part Kit P/N 01-1042 $ 29.50
2. 3/8 -24 x 12in threaded rod Assembly 01-1043 $41.50
3. 3/8-24 ball joint rod end Female With jam nut (2 ea)
4. 3/8 -25 Female Rod end clevis with 1/4 x 3/8 x 7/8 bushing
5. hairpin retainer .1 x 3/8 Aluminum.
Pedal extension Parts:
1. .368 x 8 inch steel rod Part Kit P/N 01-1042 $ 29.50
2. 3/8 -24 x 12in threaded rod Assembly 01-1043 $41.50
3. 3/8-24 ball joint rod end Female With jam nut (2 ea)
4. 3/8 -25 Female Rod end clevis with 1/4 x 3/8 x 7/8 bushing
5. hairpin retainer .1 x 3/8 Aluminum.
